| DIMENSIONS & WEIGHT |
ENGINE |
| Operating Weight (lbs.) |
10692 |
Make/ Model |
Yanmar 4TNV106T |
| Overall Width Without Bucket |
73.2" |
Horsepower/ RPM (SAE 1349 gross) |
97 / 2200 |
| Overall Height |
91.3" |
Maximum Torque (ft.-lb./ rpm) |
291 / 1400 |
| Overall Length With Bucket |
154.8" |
Cylinders/ CID |
4 / 269 |
| Front Clearance Radius With Bucket |
95.8" |
Engine Lubrication (qt.) |
14.8 |
| Rear Clearance Radius |
68.7" |
Cooling System (qt.) |
16 |
| Angle Of Departure |
29.5° |
Fuel Tank Capacity (gal.) |
28.5 |
| Maximum Lift Height To Bucket Pin |
126.1" |
Fuel Consumption (65% of full load)gal./ hr. |
3.7 |
| Dump Height Fully Raised |
95.7" |
Electrical System (volt/ amp) |
12 / 60 |
| Max. Dump Angle Fully Raised |
38° |
Noise Level at Operator's Ear (d.b.a.) |
|
| Max. Bucket Rollback At Ground Level |
30° |
|
|
| Reach Fully Raised |
38.8" |
HYDRAULIC SYSTEM |
| PERFORMANCE |
Auxiliary Hydraulic Flow (gpm) |
23.4 |
| Tipping Load (lbs.) SAE 732 |
7056 |
System Operating Pressure (psi) |
2986 |
| Operating Capacity (lbs.) *SAE J818 |
2470 |
|
| Breakout Force (lbs.) Bucket Cylinders |
8692 |
UNDERCARRIAGE |
| Breakout Force (lbs.) Lift Arm Cylinders |
8549 |
Traction Motor Type |
Piston |
| CYCLE TIME |
Traction Drive Type |
Planetary |
| Raise - Full Load (seconds) |
4.8 |
Traction Force (lbs.) |
13770 |
| Lower - No Load (seconds) |
3.1 |
Traction Brake Type |
Friction |
| Dump - Full Load (seconds) |
3.3 |
Track Rollers (per side) |
6 |
| Curl - No Load (seconds) |
2.1 |
Track Type |
Rubber Crawler Belt |
| BUCKET |
Track Width |
18" |
| Width |
80" |
Track Ground Contact Length |
62.9" |
| Capacity SAE Heaped (cu. ft.) |
24 |
Ground Pressure (psi) |
4.3 |
| * Operating capacity of track loader to be rated according to SAE J818 at no more than 35% of tipping load |
Travel Speed (mph) |
5.0 / 6.9 |
| Minimum Ground Clearance |
13.5" |
